Elecronic re-installation onboard-Help

Seeking advice for a project or do you want to share the outcome of one? Various technical tips and questions.
Post Reply
User avatar
patxikiter
Posts: 79
Joined: Fri Jul 01, 2011 7:25 pm
Location: Gibraltar Strait
Contact:

Elecronic re-installation onboard-Help

Post by patxikiter » Thu Dec 10, 2015 2:24 pm

Hi all

I have started to have some problems with the AIS and a GPS antenna broken. i have decided to "rebuilt" the electronic onboard. I am not sure if the technician made the installation properly

I have 1 Raymarine C120, 1 Raymarine DSC VHF, 1 CSB 200 AIS, 1 Raymarine 435 Plotter, ST60 Raymarine wind/sound/speed, S2 Raymarine Autopilot, 2 GPS and 2 VHF antenna and 1 NDC-3 Multiplexer.

With the RS232 or USB exit multiplexer usually connect a PC to sent datas to a tablet outside for Regatta, but i have to change the baud rates on the inside plotter (C120) from 38400 that AIS needs to 4800 bauds, so i lose all datas in C120 Plotter. If i don't do this i have no info on the PC

I have also found and NMEA wifi that i can connect to de multiplexer, so i can remove the pc to send data by wifi.

I show you what i have and ask you how to connect everything as it could be connect.

thank you very much. all help is very appreciate

Image

LarsCidh
Posts: 3
Joined: Mon Jan 28, 2019 12:57 pm

Re: Elecronic re-installation onboard-Help

Post by LarsCidh » Sat Oct 05, 2019 4:13 pm

I changed to nmea2000 via stng to St1
St60+ instruments and ev100 autopilot axiom PRO plotter aistransponder ais650 and vhfsplitter ais100
Workshop super tool 6 hour to clearing up Cables and to Adde new

LarsCidh
Posts: 3
Joined: Mon Jan 28, 2019 12:57 pm

Re: Elecronic re-installation onboard-Help

Post by LarsCidh » Sat Oct 05, 2019 4:14 pm

I added mobile 4grouter to get Easy updates

Post Reply