Using a Mantus or Rocna anchor with 412 bowsprit

Seeking advice for a project or do you want to share the outcome of one? Various technical tips and questions.
Post Reply
kenpimentel
Posts: 2
Joined: Sat Dec 08, 2018 6:44 pm

Using a Mantus or Rocna anchor with 412 bowsprit

Post by kenpimentel » Thu Jan 17, 2019 10:44 pm

I'm wondering if anyone has either a Mantus or Rocna anchor on one of the Dufours that come with the extended fiberglass bowsprits. It looks like it should still work, but trying to know that before I buy and install on my 412GL.
2018 Dufour 412GL
Currently berthed near Barcelona

Mhorton44
Posts: 8
Joined: Thu Sep 21, 2017 9:48 pm
Location: Annapolis, MD, USA

Re: Using a Mantus or Rocna anchor with 412 bowsprit

Post by Mhorton44 » Sun Mar 03, 2019 8:59 pm

I have a Rocna Vulcan on on my GL325 and the snugged up anchor does foul the bowsprit when extended, by about 30 mm. Will be trying to adjust it by dropping the roller a touch and shimming the bowsprit guide once the boat cover comes off in a week or two. Given that the configuration on your boat is similar, I would expect you to have the same problem.

Another option is to slack off the anchor a touch when deploying the bowsprit and then tighten to stop it flopping around. Needs some protection on the sprit but it does work. Helps to have the windlass control at the helm.

Post Reply