D34P Propane Locker

Equipment to your Dufour Performance. Which stuff works - and where to get it..
Post Reply
Posts: 2
Joined: Wed Jul 13, 2016 3:44 pm

D34P Propane Locker

Post by B-to » Wed Jul 13, 2016 5:05 pm

I have a 2006 34P and noticed that there are two holes (about 4" diameter) in the propane locker that have plastic covers over them that are screwed on. They are not airtight. Curious if this is standard or if the PO made these holes. I understand the locker should be airtight except for the vent hose at the bottom, so I am concerned about why these holes are there and if I should make them airtight with sealant.

angus spence
Posts: 64
Joined: Sun Nov 11, 2012 8:05 pm
Location: Scotland, Glasgow

D434P Propane locker

Post by angus spence » Mon Sep 26, 2016 2:18 pm

I am not at my boat at the moment so cannot check. But they be to provide access to the deck fittings, should you need to remove any fixings. Angus

Post Reply